What Your Home Inspection Should Cover
Siding: Look for dents or buckling.
Foundations: Look for cracks or water seepage.
Exterior Brick: Look for cracked bricks or mortar pulling away from
bricks.
Insulation: Look for condition, adequate rating for climate (the higher
the R value, the more effective the insulation is).
Doors and Windows: Look for loose or tight fits, condition of locks,
condition of weather-stripping.
Roof: Look for age, conditions of flashing, pooling water, buckled
shingles, or loose gutters and downspouts.
Ceilings, walls, and moldings: Look for loose pieces, dry wall that is
pulling away.
Porch/Deck: Loose railings or steps, rot.
Electrical: Look for condition of fuse box/circuit breakers, number of
outlets in each room.
Plumbing: Look for poor water pressure, banging pipes, rust spots or
corrosion that indicate leaks, sufficient insulation.
Water Heater: Look for age, size adequate for house, speed of recovery,
energy rating.
Furnace/Air Conditioning: Look for age, energy rating. Furnaces are rated
by annual fuel utilization efficiency; the higher the rating, the lower your
fuel costs. However, other factors such as payback period and other operating
costs, such as electricity to operate motors.
Garage: Look for exterior in good repair; condition of floor—cracks,
stains, etc.; condition of door mechanism.
Basement: Look for water leakage, musty smell.
Attic: Look for adequate ventilation, water leaks from roof.
Septic Tanks (if applicable): Adequate absorption field capacity for the
percolation rate in your area and the size of your family.
Driveways/Sidewalks: Look for cracks, heaving pavement, crumbling near
edges, stains.